On the 2013 Ford Escape, the oil life reset is done through the instrument cluster menu (there is no physical reset button). This system calculates oil life based on driving conditions, so after an oil change you must manually reset it to ensure accurate maintenance tracking. Start by turning the ignition on without starting the engine. Press the start button once (without brake) or turn the key to the ON position so the dashboard and electronics are active. Use the steering wheel controls to access the instrument cluster menu. Press the left or right arrow buttons to navigate to the “Settings” menu on the display screen. Once inside Settings, scroll until you find “Vehicle” and press OK. Inside the Vehicle menu, look for “Oil Life Reset” or “Oil Life” option. Select it using the OK button on the steering wheel controls. The screen will display the current oil life percentage. Press and hold the OK button until the system prompts confirmation. Continue holding until the display shows “Oil Life Set to 100%” or a confirmation message indicating the reset is complete. After confirmation, turn the ignition off. When you restart the vehicle, the oil life should now display 100% and the reset is complete. On some trim levels, the menu path may slightly differ (for example: Settings → Vehicle → Oil Life Reset), but the method always relies on steering wheel controls rather than pedals or hidden buttons. If the option is not visible, ensure the ignition is in ON mode and not accessory mode. If the reset does not work, repeat the process slowly and make sure the OK button is held long enough for confirmation.2013 Ford Escape Oil Life Reset (Step-by-Step)
Notes specific to 2013 Ford Escape
Search
